We are an independent bike shop based in Metheringham just outside Lincoln but our customers come from all over the country. If you need something doing, give us a call and we'll try and help. Whether it's OE repairs, motor work or something custom. We even sell complete bikes.

We are everyday regular riders. Our own bikes range from the 'teens' to the 2000's but most of our miles are done on knuckles and pans. Experience includes 10+ years working for the 'motor co' as well as time spent in major US custom shops and all our work is guaranteed.

Rich - 07825 818320
Ian - 07779 168352

Saturday, 9 June 2012

New build; black and skinny update.

We got the powder coated fork parts back within 48 hours and set about the re-assembly.





It smartens up the old forks and also adds to the look we are after on this build.

Wednesday, 6 June 2012

1984 80ci

We had a friend in Texas pick up this shovel he found on ebay of all places!

There are some bits missing but its a sound bike and a make-over could go in many different directions.  But she looks good as she is.

We'll go through her when she lands and then decide. Should be here in a couple of weeks.


New build

We're starting our next new build, as well as the 50E pan and 79FL that have just landed. Those jobs in addition to the usual repair and motor work should keep us busy.

The next bike will be a panhead chopper using a few parts from the shop as well as assorted bits from other bikes that we have worked on.

Fairly conventional basic structure to start with; original intact 49 pan frame, 50FL pan motor with alloy covers and nice polished timing cover, inline springers, although we might go with a glide front end later and other parts to suit.

She'll be black and skinny.





First job is to take apart an older set of chrome springers and get the legs powder coated black but we'll keep the springs and bottom rockers chrome.  The frame is also off for a new coat of black.

Saturday, 26 May 2012

Pan in a Pan

We've finished the 'Pan in a Pan'.
She's been done very much in the style of The Garage Company but with her own identity.
She is a tough, fast bike with a mean attitude.

Pan V Twin frame and correct in-line springers.
Cut down Flanders O bars, original HD internal controls and 4" risers.
Cut down rear fender and narrowed fat bob tanks with all welding left raised and showing.
No repaint and and an overall aged and worn look (patina they call it).

Front is an 18" on a rebuilt star hub with original HD brake and brand new Firestone.
Rear is a 16" on a rebuilt star hub with original HD brake and brand new Firestone.
HD rocker clutch and custom hand change. Nice old HD rear light.
Bates rubber foot rests, Bates style light and seat and pad.

Motor is a fully rebuilt 49 pan. Bored to 84" with plenty of Crane and Sifton parts.
Brand new V-Tronic electronic ignition, brand new Primo 1 1/2" belt drive.
S&S Shorty Super E with custom cut down round air cleaner.
Completely re-wired from scratch with new cloth covered cable and three circuit fused.

We've built this bike with HD parts where possible and the 'dirty' style is intended.
If you dont like the finish you could clean it up yourself and if you want any parts swapping out we can do that.

She is available for inspection in Lincoln and is fully registered.

For sale at £11,000.  SOLD



The high resolution photos should show all the detail.

Saturday, 19 May 2012

Cylinder head parts breakdown (rear)




These motors may be old but they weren't just thrown together. A lot of thought went into this design. Remember, although this isn't a first year knuckle, these were the first overhead valve motors that the company produced (I know, I know, but they were the first for mass consumption).




The only major change when the panhead arrived in 48 was the method they used to stop the oil leakage around the valves and springs. The pan covers may be more effective but those knuckles sure are pretty.

The Red 46

We are in the process of a top end job on a 1946 EL knuckle. There was a problem with a lack of compression on the front cylinder as well as an excess of oil in the top end' even pushing out through and into the front exhaust. As you would expect we checked both heads and found wear to three valve guides and damage to two of them.

So; dis-assemble the heads, a good clean, new guides in and sizing to the valve stems, then lap the valves and re-assembly.  A time consuming job but well worth the effort.


Pressing the guides in. This also holds the lower part of the valve spring cover in place. (The shaft is just to check alignment at this stage).


Here you can see that both the valve guides and valve spring covers are now intalled.


Here the valves are in, the rocker arms and shafts are intalled and the rocker arm housing. 


Here you can see the inlet and exhaust cover plates installed. There are gaskets and sealer to keep things sealed. The next job is to wait until the sealer dries and then we peel off the excess.
Then its the second head and then installation on the bike.

Friday, 18 May 2012

Good bye for now old friend.


Rich delivered Guy's pan last week and she's looking very nice. The motor has been completely gone through as there was some major damage. It's taken an age but so much needed doing.

We've put one of our spare transmissions in while we sort the original one and when she comes back in for the transplant we can look at a few other things.

We put 50 miles on her to shake out the rattles and now all she needs is a careful 500 running-in miles. As with all rebuilds there will be a few breakin-in adjustments needed but nothing that can't be sorted with a screwdriver and a spanner!

If you see her out on the road give her a wave. See you soon old girl.