We are an independent bike shop based in Metheringham just outside Lincoln but our customers come from all over the country. If you need something doing, give us a call and we'll try and help. Whether it's OE repairs, motor work or something custom. We even sell complete bikes.

We are everyday regular riders. Our own bikes range from the 'teens' to the 2000's but most of our miles are done on knuckles and pans. Experience includes 10+ years working for the 'motor co' as well as time spent in major US custom shops and all our work is guaranteed.

Rich - 07825 818320
Ian - 07779 168352

Tuesday, 8 October 2013

FOR SALE


For sale, 1961 FLH Panhead duo glide.As can be seen from the pictures this is a very decent pan, not perfect but in great condition. It is registered, taxed 08/14 and mot'd. Its got rebuilt linkert, new points, been serviced and fitted with correct bits that were missing when it came in from the states. The engine has s+s pump with correct uprated worm drive to make pump work more efficiently, it also has jims machining hydrosolids tappet conversion which obviously makes for quieter running motor. Gear selecting is as smooth as they come and brakes are superb, unsual for drums. It has still got 6v charging system. It would make a great restoration bike or just ride the socks of it as is. A great tourer or kings road cruiser. Any more info required just call or come and look for yourself. Price £11,250 ono
   

Sunday, 22 September 2013

Auto jumble delights

Went down see Darren and co at Farm Fresh last week and picked up these parts for the '13 9B.

Nice pair of original lights, Prestolite gas canister and a rack for a 1915.  They never made racks or carriers for Harleys until 14 onward so this one will need some work like the Corbin speedo did.

The 1915 season was the real step forward for Harley, mainly due to the three speed trans and that's the year the accessory side really took off as well. Loads of stuff is available for 15 and later and much of it can be retro-fitted with a little work.

Work starts

We're going through this one head to toe. It will be a strong rider but look real beat up.

Front and rear hubs have been checked and adjusted as needed, new rear brake shoes, all the lower fork bushes, top inner springs, fork bearings.  New seat post bush, handlebars straightened, toolbox strap removed, repaired and replaced. Brake pedal bush remade, clutch rocker repaired and it still looks like nothing has been done. But that's the idea.

Friday, 13 September 2013

They're all 47s

They all seem to be 47s these days.

Bullneck frame, offset forks and unusual (for 47) 18" wheels.




Tuesday, 13 August 2013

The 47's interior

A few  pictures of the interior in the 47 Ford coupe, all aircraft like



Buell bottom end


I've been brought a buell lightning engine to rebuild bottom end. The owner has supplied wiseco pistons and carillo rods. They are obviously considerably lighter than the original harley offerings. You can see how much weight from the drillings has to come out. There is also another issue in that rods are wider and longer. Length is not a problem in they are 0.020 longer so careful measuring of piston height etc will have to be measured to gain proper compression and squish. Also angle on piston has to replicate angle in head for proper squish and clearance. Wider rods is a problem though. As crank is done up its biting side of rod, so now rod has to be surface ground to correct width or new thrust washer surface ground for correct fitment and possibly still modify rods to clear rebate in crank. The point of all of this is you can still buy expensive aftermarket equipment that doesn't fit. Everything has to be measured and measured for complete accuracy. Most things can be overcome but not without specialist equipment. The average engine builder wouldn't have a surface grinder. Fortunately for me there is one next door. Prior to this build, this engine has never been balanced despite being rebuilt twice?????? Allegedlly  

Friday, 12 July 2013

My 1st pan

Today my original panhead turned up for some work. It pretty much as i built her and it got sold to Pete. He has got a problem with his leg and at time i said if he couldn't start her i wouldn't sell. Anyway having shown him what to do, he manages to fire her 1st time virtually every time. He's had many years and has proved to be ultra reliable and is starting to age well. Still got a bit of a soft spot for her. She won a best paint award at some show which is very amusing considering its a rattle can job.