We're going through this one head to toe. It will be a strong rider but look real beat up.
Front and rear hubs have been checked and adjusted as needed, new rear brake shoes, all the lower fork bushes, top inner springs, fork bearings. New seat post bush, handlebars straightened, toolbox strap removed, repaired and replaced. Brake pedal bush remade, clutch rocker repaired and it still looks like nothing has been done. But that's the idea.
We are an independent bike shop based in Metheringham just outside Lincoln but our customers come from all over the country. If you need something doing, give us a call and we'll try and help. Whether it's OE repairs, motor work or something custom. We even sell complete bikes.
We are everyday regular riders. Our own bikes range from the 'teens' to the 2000's but most of our miles are done on knuckles and pans. Experience includes 10+ years working for the 'motor co' as well as time spent in major US custom shops and all our work is guaranteed.
Rich - 07825 818320
Ian - 07779 168352
Sunday, 22 September 2013
Friday, 13 September 2013
Tuesday, 13 August 2013
Buell bottom end
I've been brought a buell lightning engine to rebuild bottom end. The owner has supplied wiseco pistons and carillo rods. They are obviously considerably lighter than the original harley offerings. You can see how much weight from the drillings has to come out. There is also another issue in that rods are wider and longer. Length is not a problem in they are 0.020 longer so careful measuring of piston height etc will have to be measured to gain proper compression and squish. Also angle on piston has to replicate angle in head for proper squish and clearance. Wider rods is a problem though. As crank is done up its biting side of rod, so now rod has to be surface ground to correct width or new thrust washer surface ground for correct fitment and possibly still modify rods to clear rebate in crank. The point of all of this is you can still buy expensive aftermarket equipment that doesn't fit. Everything has to be measured and measured for complete accuracy. Most things can be overcome but not without specialist equipment. The average engine builder wouldn't have a surface grinder. Fortunately for me there is one next door. Prior to this build, this engine has never been balanced despite being rebuilt twice?????? Allegedlly
Friday, 12 July 2013
My 1st pan
Today my original panhead turned up for some work. It pretty much as i built her and it got sold to Pete. He has got a problem with his leg and at time i said if he couldn't start her i wouldn't sell. Anyway having shown him what to do, he manages to fire her 1st time virtually every time. He's had many years and has proved to be ultra reliable and is starting to age well. Still got a bit of a soft spot for her. She won a best paint award at some show which is very amusing considering its a rattle can job.
Company car
Over the dark winter nights i've been working on the new company car, its obviously taken considerably longer than i would of liked. Its a 47 Ford super deluxe coupe done with a military tongue in cheek stylely. It features 350/350 combo for reliabilty, s10 front clip, ladder bar rear on transverse spring and panhard.
Monday, 8 July 2013
gettin there
Its all the little bits now. Wiring, cables, footboards etc etc. Pretty she aint, dirty she is, ive decided get her up and run in with original ignition and then put magneto on once she done a few miles. It now got Ian's original chrome linkert rebuilt from the love bike which is probably way to nice for her, with unknown bird catcher,buco enclosed chain guard, strange bars from ebay, one off pipes and few dress up and down items
Subscribe to:
Posts (Atom)



















